Fairings And Panels - BMW HP4 RACE Rider's Manual

9
128
Place chain 3 on camshaft
sprocket and install completely
by turning the rear wheel 2.
Pull rear wheel 2 back until you
z
feel it engage in the rear clamp
shells.
Install quick-release axle 1, but
do not tighten yet.
Check chain sag (
Turn to clamp rag 1 between
chain and camshaft sprocket.
Quick-release axle is pulled
onto the stops of the chain
tensioners.
Tighten quick-release axle 2 to
appropriate torque.
Rear-wheel quick-release
139).
axle in swinging arm
Joint compound: Lubricate
quick-release axle and thread,
Optimoly TA
74 lb/ft (100 Nm)
Remove rag 1.
Operate rear brake lever firmly
several times until the pressure
point can be felt.

Fairings and panels

Removing the engine
spoiler
Remove snap fastener bolts 1.
Support engine spoiler 2.