BMW HP4 RACE Rider's Manual page 56

Support front forks using suit-
5
able tool.
54
z
Remove retaining screw 1.
Remove nut 2.
Remove fork bridge insert 1.
In addition to the fork bridge
inserts with 28/30 mm 1 in-
stalled by default, fork bridge
inserts with 26/32 mm 2 are
also supplied.
Fork bridge offset basic
setting
Fork bridge insert 30 mm
Fork bridge offset adjust-
ment range
Fork bridge inserts 26/32 mm
and 28/30 mm
The fork bridge inserts can be
installed in two positions; this
results in four different fork
bridge offsets.
During the installation, make
sure that the fork bridge inserts
at the top and bottom are both
installed with the same offset;
align them with the markings
on the fork bridge using the
same values.
Install fork bridge insert 1, tak-
ing care to align it with the fork
bridge using the marking 2 for
the desired offset.