Rear View Of 5500 Control Unit - IBM 5500 Operational, Installation, And Maintenance Manual

Rear View of 5500 Control Unit

Step 2: Connecting the Twinax Breakout Box
50
Chapter 3: Installing the 5500 Express IP Control Unit
• Planning, Installation, and Maintenance Guide (this book)
• Power cord
• Safety Information booklet, SD21-0030
Note: If anything is missing or damaged, contact your point of sale for
information about replacement.
• One of the following (not included with your 5500 Control Unit):
- Twinax IBM Network Station (Model 8361-341) with a minimum of
24MB of RAM, or
- Windows NT/95 or 98 workstation with IBM 5250 Adapter and IBM
5250 Express TCP/IP software
Microsoft Internet Explorer 4.0
Figure 16 is a view of the rear connections of the 5500 Control Unit:
Voltage
Switch
WAN 0
RS-232
Connector Connector
Figure 16: View of 5500 Control Unit Connections
Connect the twinax breakout box (brick) to the 5500 Control Unit twinax
adapter in slot 2. Refer to Figure 17 for the exact location.
1. The IBM 5250 Express TCP/IP driver latest versions are available from the
following site: http://www.networking.ibm.com/525tcpip/tcpdnld.html
Planning, Installation, and Maintenance Guide
1
with Netscape Navigator 3.0 or
Twinax LAN 0
Adapter
Card
1 2 3
Slots
WAN 1
RS-232
LAN 1
4 5 6 7 8
55E1I002
.