Part Numbers; Using The Port Tester - IBM 5500 Operational, Installation, And Maintenance Manual

Part Numbers

Using the Port Tester

Description
Cable to Cable twinax adapter to
connect two plugs
Twinax panel mounting socket
Twinax plug
Plastic twinax plug insulating
sleeve
Station protectors
20' twinax lead & plugs
You can use this IBM Workstation Controller Port Tester (IBM P/N 94X2040)
to isolate cabling and port problems on the 5500 Control Unit.
Attach the port tester directly to one of the following:
• 5500 Control Unit twinax port or cable
• Twisted-pair 5500 Control Unit port or cable
- This only works for RJ11 pins 2 and 5
• Twinax adapter on an IBM Cabling System
The port tester monitors signals from the twinax ports on the 5500 Control
Unit. Cables being checked must be connected to a 5500 twinax port.
DANGER
To avoid a shock hazard, do not connect or disconnect any cables or
perform installation, maintenance, or reconfiguration of this product during
an electrical storm.
Attention: Remove and reconnect cables carefully. You may damage the
connectors if you use force.
IBM Part Number
7362230
7362179
7362229
94X3698
7362426
4236482
97