Table of Contents
Advertisement
Chapter 2. Planning for an IBM 5394 with a V.35
Communications Interface
This chapter contains information you need to plan a data communications network
using an IBM 5394 Remote Control Unit with a V.35 communications interface.
Use this chapter in addition to the IBM 5394 Remote Control Unit Introduction and
Installation Planning Guide to plan the installation of your IBM 5394.
In this chapter, you can find information about how to:
• Select your system components
• Plan the remote site
• Prepare worksheets.
Planning for System Components
The V.35 communications interface does not affect work station support. For a list
of work stations supported by the IBM 5394, refer to the IBM 5394 Remote Control
Unit Introduction and Installation Planning Guide. You should, however, keep the
following considerations in mind when planning your installation.
The IBM 5394 Remote Control Unit
IBM 5394 Model 01C supports the V.35 communications interface. You can attach
up to 16 work stations to this model. Model 01C also supports the EIA
2320
inter-
face.
Chapter 2. Planning for an IBM 5394 with a V.35 Communications Interface
3
Advertisement
Table of Contents
