Field Code Updates - IBM 5500 Operational, Installation, And Maintenance Manual

Figure 33: Network Station Troubleshooting
Symptom
Network Station changes NVRAM
settings after properly booting to a
Configuration Host rather than the
5500 Control Unit
NS 3270 and 5250 cannot call telnet
host by name
Network Station Navigator cannot
browse Intranet or Internet by name
of URL
Cannot delete the Network Station's
Navigator bookmarks after the Boot
and Configuration files are
transferred from the 5500 Control
Unit
Network Station appears to have lost
connection.
a. This number should be your IP or host name of the host configuration.
b. This number should be your IP or host name of the host configuration.

Field Code Updates

Create or edit the defaults.dft file on your configuration NSM
Host server as follows:
set config-auto-save-nvram = false
Ensure that the Host name, Domain, and DNS entries are
correct in the 5500 Control Unit's ConfigurationPlus program.
For information, see "Configuring the IBM 5500 Controller
ID" on page 61.
1. Ensure Host Name, Domain, and DNS entries are correct
in the 5500 Control Unit's ConfigurationPlus program.
2. Ensure that the SOCKS host and port number are correct in
the ConfigurationPlus program (see "Configuring SOCKS
Host for Network Station" on page 63).
Go to the Main Menu, Utilities windows in the
ConfigurationPlus program. Select the option Delete
Bookmarks.
1. Reboot the Network Station.
2. Check the cabling.
Service and support personnel can obtain code updates through the following
web site:
http://www.networking.ibm.com/525/525supt.html
Download the file to a diskette and use the 5500 Express IP Control Unit's
diskette drive to update the driver and application code.
What To Do
85