2.3.2 Connecting Additional Wireless Clients
Preconditions
Wireless client
configuration
SpeedTouch™716g
configuration
E-DOC-CTC-20041126-0014 v3.0
Make sure that:
The SpeedTouch™ is powered on and ready for service.
Optionally, the SpeedTouch™ wireless settings have been personalised.
The wireless client adapters are installed on all computers you want to
connect to the WLAN.
Configure your wireless client with the same network name (SSID) and encryption
as the SpeedTouch™716g.
For more information, consult your wireless client's user documentation.
If the SpeedTouch™ Access Control List (ACL) is On in Deny mode some additional
configuration is needed:
1
Open the SpeedTouch™ web pages on a computer that is listed in the ACL or
that is connected using wired Ethernet/USB.
For more information, see
Pages" on page
2
Browse to Wireless > Access Control.
3
The Access Control page appears. Click View Access Control List.
4
The Wireless Action Control List page appears:
Click Add.
5
Type the MAC Address of your wireless device in the MAC address of wireless
adaptor field:
Click Apply.
SpeedTouch™ Local Networking Setup
"5.1 Accessing the SpeedTouch™ Web
44.
Chapter 2
23