Chapter 1
SpeedTouch™ Installation
Switch on
SpeedTouch™
Connect your
computer(s)
14
Once all previous steps are completed, push the ON/OFF button on the back panel
to switch on the SpeedTouch™.
The SpeedTouch™ is ready for service as soon as the Power LED on the front panel
is solid green.
If this LED does not light up, see
To connect your computer(s) with the SpeedTouch™, proceed with
"2 SpeedTouch™ Local Networking Setup" on page
"8.4 Troubleshooting" on page
15.
103.
E-DOC-CTC-20041126-0014 v3.0