Table of Contents
Advertisement
Host computer
configuration
SpeedTouch™
configuration
E-DOC-CTC-20041126-0014 v3.0
Make sure that:
The firewall on the host computer (for example Windows Firewall) allows the
service to be accessed on this computer.
The host computer is configured with a static IP address.
You can also reserve an IP address for this computer. For more
information on the SpeedTouch™, see
page
57.
Proceed as follows:
1
Open the SpeedTouch™ web pages.
For more information, see
Pages" on page
2
Browse to Advanced > Virtual Server > Port Fowarding
3
The Port Forwarding page appears:
Click Add to add the new port forwarding rule.
4
The Add New Port Forwarding Rule appears:
5
If you want to:
Create a port forwarding entry for a specific application:
1
Select an application in the Pre-defined list.
2
Type the IP address of the local host that will be used to provide this
service in the Forwarded to field.
3
Click Apply.
Manually create a port forwarding entry.
1
Enter a name for the application.
2
Type the IP address of the local host that will be used to provide this
service in the Forwarded to field.
3
Enter the port forwarding rules in the By using the rules table.
4
Click Apply.
6
The SpeedTouch™ adds the new rule to the Port Forwarding table.
" The DHCP Server page" on
"5.1 Accessing the SpeedTouch™ Web
44.
Chapter 7
Advanced Configuration
93
Advertisement
Table of Contents
