Connecting A Computer Using The Ethernet Cable - THOMSON TG608 Setup And User Manual

1.3

Connecting a Computer Using the Ethernet Cable

Requirements
Both your computer and Thomson Gateway must have a free Ethernet port.
Your computer must be configured to obtain an IP address automatically. This is the default setting.
Ethernet cable
In your package, you will find a cable with yellow connectors. This is the Ethernet cable.
Procedure
Proceed as follows:
1 Connect one end of the Ethernet cable to one of the
2 Connect the other end of the Ethernet cable to your computer.
3 Your computer is now connected to your network. No additional configuration is needed.
E-DOC-CTC-20080118-0035 v4.0
ON
Reset
OFF
22V DC Console 1 2
yellow Ethernet ports of your Thomson Gateway:
3 4
1 Installation
11