Table of Contents
Advertisement
WAN IP settings
PPP user name and
password
E-DOC-CTC-20041126-0014 v3.0
The WAN IP Settings page allows you to configure the WAN IP settings:
Click:
Obtain an IP address automatically if your ISP wants you to get a dynamic IP
address.
Use the following IP address if your ISP has provided you with a static IP
address.
Enable NAT to enable Network Address Translation (NAT).
Enable QoS to enable Quality of Service (QoS).
The MTU box allows you to change the Maximum Transmission Unit (MTU).
!
Do not change the default MTU setting unless specifically asked by your ISP.
If you are configuring a PPPoE or PPPoA connection following window will appear:
Following fields are available:
PPP User Name:
Type the user name provided by your ISP.
PPP Password:
Type the password provided by your ISP.
Always On:
Click this option to make sure the connection is always active.
Dial on Demand:
Click this option to make a connection on demand. Enter the timeout to cut off
the network connection if there is no activity for this router.
Chapter 5
SpeedTouch™ Web Interface
49
Advertisement
Table of Contents
