The DHCP Server page
The UPnP page
E-DOC-CTC-20041126-0014 v3.0
The DHCP Server Configuration page allows you to configure the SpeedTouch™
DHCP server:
Click:
DHCP Server On if DHCP service is needed on the LAN. The router will assign
IP address, gateway address for each of your PCs.
Click Reserved IP Address List to assign a static IP address to a
computer on your LAN.
Relay On to use a DHCP server available on another network.
Server and Relay Off to disable the SpeedTouch™ DHCP server.
The UPnP page allows you to enable/disable UPnP:
If you select the Enable UPnP check box, all local hosts will be able to detect the
SpeedTouch™. Any local host will be able to create port mappings for any local
device.
If you want to use this feature, make sure that UPnP is correctly installed on
!
your computer. See
"8.2 UPnP™ on Windows XP Systems" on page
Chapter 5
SpeedTouch™ Web Interface
99.
57