Table of Contents
Advertisement
Chapter 6
Voice over IP
6.2.2 MGCP Web Pages
The VoIP menu
Audio Codec
PSTN Control
86
Following items are available on the VoIP menu:
MGCP
Audio Codec
PSTN Control
MGCP
The MGCP Configuration page allows you to configure your connection to the call
agent:
Following fields are available for configuration:
Status:
Indicates the current status of your VoIP network. Depending on the current
status one of the following messages will be shown:
MGCP is running. The VOIP service is ready.
Call agent is down. You cannot make VOIP phone calls.
Internet connection is not available. You cannot make VOIP phone calls.
Interface:
The interface you want to use to connect to your call agent.
Device Name:
The device name you registered at the ISP for your router.
Call Agent IP Address:
The IP address of your call agent.
The Audio Codec Configuration page allows you to select the audio codec of your
choice:
This page allows you to configure:
The tone/ring signals specific to your country.
The prefix digits for PSTN calls.
If you dial this prefix (default "*"), the SpeedTouch™ will use the PSTN
network to call the number following the prefix.
E-DOC-CTC-20041126-0014 v3.0
Advertisement
Table of Contents
