Table of Contents
Advertisement
2.2 USB Connection Setup
Introduction
Supported Operating
Systems
Procedure
E-DOC-CTC-20041126-0014 v3.0
If your computer is not equipped with an Ethernet port, you may want to connect
the computer to the SpeedTouch™ using the USB port on the back panel of the
SpeedTouch™.
USB connectivity is supported for following operating systems:
Microsoft Windows XP
Microsoft Windows 2000
Microsoft Windows Milennium
Proceed as follows:
1
Connect the SpeedTouch™ to your computer using the blue USB cable
provided:
2
Connect the other end of the USB cable to (one of) the USB port(s) on your
computer.
You can also connect your computer to the SpeedTouch™ using a
USB hub.
3
Windows detects the presence of the new Thomson USB Remote NDIS device:
4
If the Found New Hardware Wizard asks your authorisation to connect to
Window Update to search for software select No, not this time and click Next.
Chapter 2
SpeedTouch™ Local Networking Setup
17
Advertisement
Table of Contents
