Table of Contents
Advertisement
Chapter 5
SpeedTouch™ Web Interface
ATM PVC
Connection type
48
The ATM PVC section allows you to configure the VPI/VCI settings:
Following fields are available:
VPI (Virtual Path Identifier):
Identifies the virtual path between endpoints in an ATM network. The valid
range is from 0 to 255.
VCI (Virtual Channel Identifier):
Identifies the virtual channel endpoints in an ATM network. The valid range is
from 32 to 65535.
If you do not know which VPI/VCI you should use, select the Auto Scan
Internet Connection (PVC) check box to determine the correct value.
Enter the values provided by your ISP and click Next.
The Connection Type page allows you to select your connection type:
To configure your connection type:
1
In the Protocol dialog box, select the protocol provided by your ISP (for
example PPPoE).
2
In the Encapsulation list, click the Encapsulation type provided by your ISP (for
example LLC/SNAP).
3
Click Next to continue.
E-DOC-CTC-20041126-0014 v3.0
Advertisement
Table of Contents
