Table of Contents
Advertisement
Chapter 5
SpeedTouch™ Web Interface
Configure LAN side
50
Manually Connect:
Click this option if you want to connect to the Internet via the SpeedTouch™
web pages. Enter the timeout to cut off the network connection if there is no
activity for this router.
For more information, see
page
Please type the user name and password provided by your ISP and click Next.
The Configure LAN side Settings page appears:
settings
This page allows you to:
Change the LAN IP address of the SpeedTouch™.
Following fields are available:
Primary IP Address:
Enter the first IP address for your LAN connection.
Subnet Mask:
Enter the subnet mask for your LAN connection.
Configure the secondary IP Address and Subnet Mask:
Select this check box to make another set of IP Address and Subnet Mask
to connect to your router if they are not included in the range that DHCP
server accepts.
Change the Maximum Transmission Unit (MTU).
Do not change the default MTU setting unless specifically asked by
!
your ISP.
" The Connect to Internet page" on
47.
Secondary IP Address:
Enter the second IP address for your LAN connection.
Subnet Mask:
Enter the subnet mask for your LAN connection.
E-DOC-CTC-20041126-0014 v3.0
Advertisement
Table of Contents
