Table of Contents
Advertisement
Chapter 3 Names and Functions of Each Part
■
3.1 Front panel
① LCD screen
③ POWER switch
④ Measurement POD
① LCD screen
② Operation panel
③ POWER switch
④ Measurement POD
⑤ OSC OUTOUT
⑥ ＵＳＢ ports
Fig. 3-1 Front panel
It displays a measurement screen of this product.
It includes operation buttons and the like of this product.
It starts/ stops this product.
Only when Main power switch on the rear is turned on, it is effective.
It connects a sample to be measured (the standard POD for SY-8218: SY-951, the standard POD for SY-8219:
SY-955).
It is the output terminal of the built-in signal generator.
It connects a USB memory to save/ recall measurement data and setting conditions.
There are five USB ports; two on the front and three on the rear. Every USB port can be used. They are
assigned characters of driver in order of attachment timing (first E, next F, G, H, and finally I) in the same
manner as a computer.
② Operation panel
⑤ OSC OUTPUT
11
B-H ANALYZER SY-8218 / SY-8219
⑥ USB ports
Advertisement
Table of Contents
