Parts Names And Functions - Iwatsu SS-521 Instruction Manual

1.3 Parts Names and Functions

Terminator
Output connector
The current waveform of the measured conductor is output at a
constant sensitivity (1 V/A).
Connect to the BNC input connector of the waveform
measurement instrument.
See p. 7 and p. 14.
Unlock lever
The output
connector can be
disconnected by
pulling this part
toward you.
Key and LEDs
(p. 28)
See p. 10.
Power plug
Connect this to the PS-54 or the PS-52 Power Supply to
supply power to the sensor terminator.
Ventilation holes
Upper
side
Power supply cord
Parts Names and Functions
Shell
Side
Bottom side
25