Chapter 2 Names And Functions; The Front Panel Of Hc Unit - Iwatsu CS-200 Series Instruction Manual

Chapter 2 Names and Functions

This chapter describes the names and functions of each part of the HV Unit CS-210 as an example.
Section 2.1 explains the names and functions of the front panel, Section 2.2 the rear panel, and
Section 2.3 the connection ports of the connection terminals

2.1 The Front panel of HC Unit

Figure 2.1 shows the front panel of the HC Unit CS-210 and explains the names and functions of each part.
①
POWER LED
・Power is supplied to the AC LINE INPUT terminal on the rear of this Instrument.
・The cable from the CS-8000 Series CONTROL INTERFACE OUT connector is connected to the
CONTROL INTERFACE IN connector on the rear.
・When the power of the CS-8000 Series is ON.
The LED Lights blue
The HC Unit CS-200 Series does not have an operation switch for turning the power on and off.
②
Vent
The outside air is sucked in through this vent and exhausted by the fan motor on the rear.
Place something in front of the vent to prevent it from blocking.
Figure 2.1 Front panel of HC Unit CS-210
HC UNIT CS-200 Series Instruction Manual
Chapter 2 Name and Functions
.
2-1