Cursor Measurement; Cursor Setting - Iwatsu SY-8218 Instruction Manual

■

6.7 Cursor measurement

■

6.7.1 Cursor setting

① Press to display the cursor menu shown in Fig.6-6.
② Move the edition cursor to an item to be set and press
The cursor being set is displayed.

If is not pressed for approx. 3 seconds, the item on the edition cursor is set automatically.
➂ Items to be measured by each cursor are shown in Table 6-4.
Grad (grade)

6-5: Even if Cross or Grad cursor is set for the time axis graph, the cursor is changed to the vertical cursor and the same items can be
measured.
Table 6-4 Cursor types and measurement items
Cursor Display graph
B-H
Cross
6-5
Time axis
B-H
6-5
Time axis
Off
to determine the setting.
Measurement items
B (magnetic flux density), H (magnetic field strength)
B, H, V (induced voltage), I (exciting current)
 (permeability)
B, H, V, I
Cursor not displayed
37
B-H ANALYZER SY-8218 / SY-8219
Fig.6-6 Cursor menu