Table of Contents
Advertisement
■
6.10 USB memory output of screen hardcopy
● A hardcopy of a measurement screen is generated to USB memory.
① Specify the file format of a screen hardcopy using Print
on Utilities screen in advance (see the
② Insert USB memory into USB port of this product.
➂ When a measurement screen is displayed, press
to display Save as screen.
(See Fig.6-16.)
④ Confirm the edition cursor on Target Equipment and press
Popup List opens indicating drive of USB memory
which is recognized by this product.
Move the edition cursor to the drive name to be generated and
press
to determine the drive for the output destination.
At that time, Save as screen displays the folder and the file on
route of the determined USB memory
(See Fig.6-17.)
The folder and the file where things except the character that can
be input to the name with ten keys are included cannot be displayed.
However, only _ (underscore) can be displayed.
● If output is made with a new name added on the route
Here, how to store F:¥SAMPLE2.jpg is explained.
⑤ In the status shown in Fig.6-17, move the edition cursor to File
Name (see Fig.6-18).
⑥ Press
to open Popup Edit Box in which a file name
is entered. Use the ten key to enter the file name consisting of
alphanumeric characters. To change the input location,
press
To change a alphanumeric character, press
to move the edition cursor to the character and press
Or, rotate
Finally press
the file name.
6-7: The file name consists of up to 30 characters
including 4 characters for extension.
■
5.3 Setting of Print).
to move the edition cursor.
to change the alphanumeric character.
to close Popup Edit Box and determine
.
*6-7
.
46
B-H ANALYZER SY-8218 / SY-8219
Fig.6-16 Save As screen
Fig.6-17 Save As screen
Fig.6-18 Save As screen
Fig.6-19 Save As screen
Advertisement
Table of Contents
