Iwatsu SY-8218 Instruction Manual page 70

Setting items and setting range
They are in accordance with table below:
Category
Le (effective length of magnetic path)
Ae (effective net core area)
Ve (effective net volume)
We (effective weight)
Freq.(measurement frequency)
B (magnetic flux density)
Unit
Pc (core loss)
Pcv (core loss per volume)
Pcm (core loss per mass)
L (inductance)
I m (exciting current)
1
V m (induced voltage)
2
Sound
Information
Warning
(equipment
Date
information)
Time
Print
File Format
(screen print)
Average (number of average cycles)
Retry (number of retry cycles
Measuring
Mov-Avg (moving average cycles)
Method
Coil (method of turns)
Fixed Parameter (target parameter)
Power Amp (used power amplifier)
Power Amp Gain (power amplifier gain)
Setting of
Pod (model number of measurement POD
Equipment
selected by measurement mode)
* POD that can be selected depends on the
installing option.
BW for Pulse (band limitation of pulse waveform)
Sample Name
Le, Ae, Ve, We
N1 (No. of primary turns),
N2(No. of secondary turns)
Function (signal type)
Measurement
Frequency
(signal frequency)
Hm, I m, Bm, V
１
Tolerance (measurement permissible error)
Setting items
Sine
Pulse
m
２
any of mm, cm, and m
any of μm ２ , mm ２ , cm ２ , and m
３ ３ ３
any of mm , cm , and m
either of g and kg
any of Hz, kHz, and MHz
either of mT and T
either of mW and W
any of W/m ３ , kW/m ３ , and mW/m
any of W/kg, W/g, and mW/g
any of μH, mH, and H
either of mA and A
either of mV and V
either of On and Off
either of On and Off
2000-01-01 - 2099-12-31
00:00:00 - 23:59:59
either of jpg and png
０ ６
a power of 2 of 2 - 2 (any of 1, 2, 4, 8, 16, 32, and 64)
a power of 2 3 - 2 ５ (any of 8, 16, and 32)
an odd number in 1 to 111
either of 1 and 2
any of B H , I and V
,
ｍ ｍ １ｍ ２ｍ
any of IE-1125, IE-1125A, IE-1125B, HSA4014-IW, HSA4052-IW, HSA4101-IW,
Other, and Not Used. However, if Other is selected, arbitrary 10 characters can be
entered.
an integral number in 1 - 100
any of SY-951(Standard), SY-32x(Chamber), SY-956(Single Sheet),
SY-8218
and SY-960(DC Bias)
any of SY-955(Standard), SY-32x (Chamber), SY-956(Single Sheet),
SY-8219
and SY-960(DC Bias)
any of Off, 100 ns, and 200 ns
Up to 20 characters
0.001 to 99999
0.1 to 9999.9
either of Sine and Pulse (however, Pulse not for μ mode)
2 digits for 10 Hz to 10 MHz and 99 Hz or less, upper 3 digits for
SY-8218
100 Hz or more can be set.
2 digits for 10 Hz to 1 MHz and 99 Hz or less, upper 3 digits for 100
SY-8219
Hz or more can be set.
2 digits for 10 Hz to 1 MHz and 99 Hz or less, upper 3 digits for 100 Hz or more
can be set.
0.001 to 99999
0.1 to 100
58
B-H ANALYZER SY-8218 / SY-8219
Setting range
２
３