Setting Of Equipment - Iwatsu SY-8218 Instruction Manual

■

5.5 Setting of Equipment

● It sets the name of a power amplifier to be connected, the gain of the power amplifier, and the rise time of a pulse for pulse excitation.
➀ Press to display Configuration screen (see Fig.5-2).
➁ Move the edition cursor to List Box of a measurement item for Setting of Equipment to be changed and press
➂ When Popup List opens, move the edition cursor to the item to be set and press
Table 5-5 shows description of each item and selectable items.
➃ Press or
[Explanatory note] Bold: Factory settings
Items
Power Amp
Integral number 1 - 100
Power Amp Gain
Pod
BW for Pulse
to close Configuration screen.
Table 5-5 Setting of Equipment
Selectable items
 Select a power amplifier name to connect. The power amplifier name is displayed on
IE-1125
the measurement screen and saved when data is saved.
IE-1125A
IE-1125B
 If Other is selected, Edit Box just under it can accept an entry; i.e. an arbitrary
HSA4014-IW
amplifier name can be entered (up to 10 characters)
HSA4052-IW
HSA4101-IW
Other
Not Used
Selects a gain of a power amplifier to connect. A gain is displayed on the measurement
screen and saved when data is saved.
10
- Displays the Pod name corresponding to the selected measurement mode.
Off
100ns Approx. 100ns
200ns Approx. 200ns
Table 5-6 Options and measurement PODs corresponding to them
BW filter－Off Selects an approximate rise time of a pulse signal generated for
pulse excitation. Setting to Off makes the rise time fastest.
29
B-H ANALYZER SY-8218 / SY-8219
to determine the selection.
Description
.