Configuring Recording Settings; Configuring Recording Settings For Analog Cameras - Bosch DB18C3100R2 Installation Manual

60 en | Default Configuration
6.3

Configuring Recording Settings

You can configure the recording settings of the analog cameras, JPEG IP cameras and MPEG4
IP cameras in these dialog boxes.
6.3.1

Configuring Recording Settings for Analog Cameras

Recording settings menu > Camera x - y tab
You can configure the recording settings of the analog cameras in this dialog box.
1
2
3
F.01U.033.308 | V7 | 2009.09
Day I Night I Weekend ... All configured time periods are displayed as tabs.
Camera 1 - 6 I Camera 7
- 12 I...
In the camera list field
Installation Guide
Select the time period for which the settings should apply.
Note:
Only the time periods configured under Time periods are
displayed.
Select the tab. Tabs with cameras are displayed for each
time period.
Select the tab with the camera for which you want to make
settings. The corresponding list field shows all cameras
connected to the same grabber card.
Note:
The number of tabs depends on the number of grabber
cards and network components in the system. IP camera
tabs are only shown when IP cameras are configured.
Select the camera for which you want to edit the settings.
Note:
Multiple cameras can be selected and set up jointly. The
settings in points 4 - 7 only refer to the selected cameras
and the associated time periods.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH