Weber Go-Anywhere Owner's Manual page 8

YOUR WEBER GRILL mAY INCLUDE CHAR-BASKET™
®
CHARCOAL HOLDERS OR CHARCOAL RAILS
USING CHARCOAL RAILS
1. Open the top and bottom vents of the barbecue and remove the
lid.
2. Position the charcoal grate so that the steel wires run across
the kettle from handle to handle. By doing this, the charcoal
rails will be installed opposite the kettle handle(s), so that the
charcoal will be away from the handle(s).
3. Position the charcoal rails so they hook over the outside
straight wires of the charcoal grate. The front of the charcoal
rails should slip over the fourth wire of the charcoal grate and
click into place.
USING CHAR-BASKET™ CHARCOAL HOLDERS
1. Open the top and bottom vents of the barbecue and remove
the lid.
2. Position the Char-Basket™ Charcoal holders opposite the
kettle handle(s), so that the charcoal will be away from the
handle(s).
8
CHARCOAL BARBECUE COOKING