System Delay Example - Manual Mode/Solid Line - Graco TapeLazer HP Automatic Operation, Parts

Operation

System Delay Example - Manual Mode/Solid Line

[M] Manual Mode Continuous Line placement
using SD Example shown: 72 inch System Delay.
Tape Application Button activity
Press and HOLD tape application button when
pointer [A] reaches start of line [B]. Release tape
application button at the end of the continuous line
[D].
Tape Interrupt
All system delay operation can be canceled by:
turning System Delay OFF, turning the LINE TYPE
button off (both LEDs off), or double pressing the
tape application button.
32 3A8108A