Splicing Tape - Graco TapeLazer HP Automatic Operation, Parts

Splicing Tape

1. Halt TapeLazer before tape is finished to
prevent tape from rolling off of the
spindle and into the lower rollers.
2. Peel remaining tape from roll and
prevent it from becoming dirty or
otherwise compromised.
3. Install new tape on tape roll spindle, see
Loading Tape, page 10.
3A8108A
4. Peel end of the tape from the new roll
and match the ends of each tape roll.
Apply splicing tape to tape seam.
5. Roll tape back onto the spindle to create
tension on tape.
6. Resume taping.
Operation
35