Table of Contents
Advertisement
Maintenance
Brake Removal and Replacement
To help prevent injury, install the blade
guard or remove blade prior to adjusting
rollers.
1.
Perform pressure relief procedure, see
Pressure Relief Procedure, page 7.
2.
Remove two pins holding brake in place.
Set aside to reuse.
3.
Using a 1/4 inch Allen wrench, remove
four bolts and washers (two on each
side).
42
4.
Pivot brake forward and remove.
5.
Replace brake and re-attach four bolts
and washers.
6.
Replace pins.
3A8108A
Advertisement
Table of Contents
