Operation
System Delay Example - Manual Mode/Skip Line
[M] Manual Mode Skip Line placement using SD
example shown: 1ft line, 2 ft space, 72 inch System
Delay.
Tape Application Button Activity
Option 1
Press and HOLD tape application button when
pointer [A] reaches start point [B]. Release tape
application button after pointer [A] passes ending
skip line [D]. Use this option when the spacing
between lines remains consistent.
Option 2
Press and HOLD tape application button when
pointer [A] reaches beginning of skip line start point
[B]. Release auto tape control button when pointer
reaches end of skip line [C]. Repeat this process
for all skip line placement. This is similar to
Semi-Auto skip line placement. Use this option
when the spacing between lines varies.
Tape Interrupt
All system delay operation can be canceled by:
turning System Delay OFF, turning the LINE TYPE
button off (both LEDs off), or double pressing the
tape application button.
30
3A8108A