Table of Contents
Advertisement
Caster Wheel Adjustments
Two front wheels allow the operator to lay
tape in straight lines. Over time, the unit may
become misaligned and will need to be
adjusted. One wheel is adjustable to assist
with alignment. To properly align the front
wheels, perform the following steps:
1.
Loosen bolt on the front wheel bracket.
2.
If taper arcs to the right, loosen left set
screw and tighten right set screw for
fine tune adjustment.
3A8108A
Setup/Startup
3.
If taper arcs to the left, loosen right set
screw and tighten left set screw.
4.
Roll the taper. Repeat steps 2 and 3
until taper rolls straight. Tighten bolt on
wheel alignment plate to lock the new
wheel setting.
17
Advertisement
Table of Contents
