Table of Contents
Advertisement
Operation
System Delay Example - Semi-Auto and Auto
Mode/Solid Line
[S] Semi-Auto Mode and [A] Auto Mode
Continuous Line placement using SD Example
shown: 72 inch System Delay.
Tape Application Button Activity
NOTE: SEMI-AUTO MODE tape application
button function for continuous line placement is
identical to AUTO MODE.
Press and RELEASE tape application button when
pointer [A] reaches start of line [B]. Press and
RELEASE auto tape application button a second
time at the end of continuous line [D].
Tape Interrupt
All system delay operation can be canceled by:
turning System Delay OFF, turning the LINE TYPE
button off (both LEDs off), or double pressing the
tape application button.
3A8108A
31
Advertisement
Table of Contents
