Table of Contents
Advertisement
Operation
Information
Use
to select Setup/Information.
Press [C] to access information.
See Universal Symbols Key, page 65, for
explanation of screen symbols.
38
Press
to open Diagnostics.
These screens are used to view and test
functionality of components.
Press
to cycle forward to diagnostic
screen #2 and screen #3, and
back to diagnostic screen #1
Diagnostic screens #2 and #3 display
alternator, battery, and charger
information, and provide a live look at
which outputs are operating properly, or
are open/short. Diagnostic screen #3
displays each output's approximate
current and duty cycle.
Control board outputs affect the
following solenoids, as referenced by
label on solenoid assembly, see Air Line
Schematic, page 62 and Solenoid
Locations on Control Board, page 48.
Control Board
Output
1
2
C
Press
to open the error screen.
This screen tracks the number of
occurrences and the time/date of the
most recent open/short.
If errors. are encountered, refer to
Troubleshooting, page 43.
to cycle
Connected Solenoids
1, 2, 5, 6
3
4
3A8108A
Advertisement
Table of Contents
