Maintenance Chart 1 - Yamaha XF375 Owner's Manual

Maintenance
EMU46891

Maintenance chart 1

TIP:
 Refer to the sections in this chapter for explanations of each owner-specific action.
 The maintenance cycle on these charts assume usage of 100 hours per year and regular flushing of the cooling water passag-
es. Maintenance frequency should be adjusted when operating the engine under adverse conditions such as extended trolling.
 Disassembly or repairs may be necessary depending on the outcome of maintenance checks.
 Expendable or consumable parts and lubricants will lose their effectiveness over time and through normal usage regardless
of the warranty period.
 When operating in salt water, muddy, other turbid (cloudy), acidic water, the engine should be flushed with clean water after
each use.
The " " symbol indicates the check-ups which you may carry out yourself.
The " " symbol indicates work to be carried out by your Yamaha dealer.
Item
Anode(s) (external)
Battery (electrolyte level,
terminal)
Battery (electrolyte level,
terminal)
Cooling water leakage
Cowling lock lever
Engine starting condi-
tion/noise
Engine idle speed/noise
Engine oil
Engine oil filter (cartridge)
Fuel filter (can be disas-
sembled)
Fuel line (DI pressure)
Fuel line (DI pressure)
Fuel line (High pressure)
Fuel line (High pressure)
Fuel line (Low pressure)
Fuel line (Low pressure)
Fuel pump
Fuel/engine oil leakage
Gear oil
Greasing points
Impeller/water pump hous-
ing
Impeller/water pump hous-
ing
OCV (Oil Control Valve) fil-
ter
Power trim and tilt unit
Propeller/propeller nut/cot-
ter pin
PCV (Pressure Control
Valve)
Spark plug(s)
53
Actions
Inspection or replacement
as necessary
Inspection
Fill, charging or replacing
as necessary
Inspection or replacement
as necessary
Inspection
Inspection
Inspection
Replacement
Replacement
Inspection or replacement
as necessary
Inspection
Inspection or replacement
as necessary
Inspection
Inspection or replacement
as necessary
Inspection
Inspection or replacement
as necessary
Inspection or replacement
as necessary
Inspection
Replacement
Greasing
Inspection or replacement
as necessary
Replacement
Replacement
Inspection
Inspection or replacement
as necessary
Inspection or replacement
as necessary
Inspection or replacement
as necessary
Initial
20 hours (3 100 hours (1
months) year)
Every
300 hours (3 500 hours (5
years) years)
Page
60
60
—
—
32, 34
36
57
—
—
33
—
—
—
—
—
—
—
—
58
55
—
—
—
35
57
—
—