Used Standards; Compatibility Test; Fig. 4-8: Used Standards - Bosch Rexroth VAM 10.1 Project Planning Manual

4-4
Technical Data
4.5

Used Standards

DIN EN 61131-2
DIN EN 61000-6-4
DIN EN 61000-6-2
DIN-EN-60529
DIN EN -60204-1
CE Marking
UL/CSA Certification
4.6

Compatibility Test

The system components of the machine operator terminals VAM 10.1 and
VAM 40.1 correspond to the following standards:
Programmable logic controllers
Part 2: Equipment requirements and tests
Electromagnetic compatibility (EMC)
Part 6-4: Special basic standard – Emitted
interference for the industrial area
Electromagnetic compatibility (EMC)
Part 6-2: Special basic standard – Noise immunity for
the industrial area
Degrees of protection by the housing
Electrical equipment of machines
Part 1: General requirements
Fig. 4-8: Used standards
Note: Concerning delivered VAM 10.1 and VAM 40.1 devices the CE
requirements are fulfilled.
The devices of the VAM family are certificated according to
• UL508 (Industrial Control Equipment) and
• C22.2 No. 14-M95 (CSA)
Note: To guarantee an UL/CSA-compliant operation, you have to
fulfill the following conditions:
• Use 60/75 °C copper wire only.
• Use Class 1 wire only or equivalent.
Note: The UL/CSA marking is only valid for the device in its delivery
status. After having modified the device the UL compliancy
has to be verified.
All Rexroth controls and drives are developed and tested according to the
latest state-of-the-art.
As it is impossible to follow the continuing development of all materials
(e.g. lubricants in machine tools) which may interact with our controls and
drives, it cannot be completely ruled out that any reactions with the
materials used by Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test
has to be carried out for new lubricants, cleaning agents etc. and our
housings/our housing materials.
VAM 10.1 / VAM 40.1
May 2003
Aug 2002
Aug 2002
Sep 2000
Nov 1998
DOK-SUPPL*-VAM*10/40**-PR02-EN-P