Table of Contents
Advertisement
Thick Facing Guide
The thick facing guide is shipped pre-attached to the fireplace.
- Thick Facing - If using thick facing, leave the guide in place (see "Thick Facing" on the following page).
- Thin Facing - If using thin facing, you may remove the thick facing guide following the directions below
(see "Thin Facing" for details). NOTE: You may leave the thick facing guide in place – it will appear as a
black border around the screen assembly.
Removing the Thick Facing Guide
The thick facing guide consists of (4) sheet-metal strips behind the screen assembly. Remove the screen
assembly to access the guide. Unscrew the screws holding the pieces in place (see illustration below).
NOTE: The top piece is different than the bottom and has the letter "T" cut into it.
The thick facing guide may be removed after facing is installed.
The ProBuilder 24 CF is shipped with a lower thick facing guide in place. It
is removed in the same fashion as the upper thick facing guide.
© Travis Industries
Installation
Thick Facing Guide
Side Pieces
Phillips
Screwdriver
(for qualified installers only)
12/17/20 - 1528
Thick Facing Guide
Top Piece
PB24 CF Install (AUST)
35
Advertisement
Table of Contents
