Table of Contents
Advertisement
2. Remove the glass frame following the directions below.
Hold the glass to prevent it from falling forward.
a
Open the 2 latches holding the glass frame in
place - follow the directions shown to the right.
Glass Frame
Glass Frame Guide
Lift the glass frame slightly, swing the top forward, then lift
b
the glass frame to disengage it from the bottom guides.
Re-Attaching the Glass Frame:
a)
Slide the two tabs on the bottom of the glass frame into the glass
frame guides. Hold the glass frame at a slight angle - see picture above.
b)
Swing the glass frame into place - you may have to lift it slightly to
allow it to fit over the top of the firebox.
c)
Attach the upper latches (follow the instructions above in reverse).
© Travis Industries
Installation
(for qualified installers only)
Replacement Glass Frame Part #
24 CF ProBuilder
12/17/20 - 1528
Pliers may be used
250-05285
45
Latch
Top of
Firebox
Glass
PB24 CF Install (AUST)
Advertisement
Table of Contents
