Lopi ProBuilder 24 CleanFace GSR2 Installation Manual page 49

Installation 49
(for qualified installers only)
Log #2
Log#2 has a groove in the bottom of the left side. The groove fits over a metal ridge on the left end of the
bottom burner. Slide the log backward until it contacts the sloped portion of the burner. Make sure the
log does not block any burner holes.
Log #3
Log#3 has a groove in the bottom of the right side. The groove fits over a metal ridge on the right end of
the bottom burner. Slide the log backward until it contacts the sloped portion of the burner. Make sure
the log does not block any burner holes.
© Travis Industries 12/17/20 - 1528 PB24 CF Install (AUST)