Lopi ProBuilder 24 CleanFace GSR2 Installation Manual page 51

Installation 51
(for qualified installers only)
Log #6
Place log #6 as shown below. The hole on the bottom of log #6 fits over the pin on Log #5. The charred
end points towards the center of the burner.
Log #7
Place log #7 as shown below. The charred end of log #7 rests on the burner. The right branch has a
notch that aligns the log with the finger of the log grate. The upper end of log #7 rests on a groove in log
#3.
© Travis Industries 12/17/20 - 1528 PB24 CF Install (AUST)