Lopi ProBuilder 24 CleanFace GSR2 Installation Manual page 64

64
4 Insert a starter collar into each of the (2) holes that were uncovered in the previous step and bend
the tabs to secure the starter collar to the fireplace. Seal the joints with silicone caulk or aluminum
(U.L. 181A-P) tape.
5 Install the fireplace into the framed chase.
Using oval pipe to get past an obstruction
If a situation arises that obstructs the
CoolSmart flex vent runs (such as
getting past a minimum sideways
vent) you may transition the 5" flex
vent to a ridged nominal 6" oval pipe
to get past the obstruction. Transition
back to the 5" round flex and continue
to the manifold.
The adapters and ridged pipe should
be factory ovalized, not field ovalized.
NOTE: All clearances to combustibles
must be maintained.
© Travis Industries
Index
5" 7-3/4"
3"
7-3/4"
5"
5"
3"
12/17/20 - 1528
5" Flex
to CoolSmart
Manifold
5" round to 6"
oval adapter
6" oval
pipe
5" round to 6"
oval adapter
5" Flex
to fireplace
PB24 CF Install (AUST)