Table of Contents
Advertisement
CoolSmart TV – Fireplace Preparation
1
Remove the knockouts from the top of the fireplace. Use snips or diagonal cutters to snip the tab
on the knockouts. Press on the far side away from the tap to pop the edge of the knockout up.
2
Grab on to the knockout with pliers and bend it back and forth until the remaining tabs break free.
Discard the knock out plate.
3
Under each knock out plate, you will find a cover plate held in place with (2) ¼" screws. Use a
nut driver or drill with an extension to remove the (2) screws. Reach in and remove the cover
plate. You may discard the plates.
© Travis Industries
Index
12/17/20 - 1528
63
PB24 CF Install (AUST)
Advertisement
Table of Contents
