Table of Contents
Advertisement
14
3
The (2) header standoffs are screwed down flat to the front edge of the top of the fireplace. On
each standoff, remove the screw that is closest to the center of the fireplace (keep screw for
reinstallation). Bend the legs at the perforations as shown below and attach the foot of the
standoff to the top of the fireplace using the screw removed earlier in this step.
Remove screw
© Travis Industries
Installation
(for qualified installers only)
12/17/20 - 1528
PB24 CF Install (AUST)
Advertisement
Table of Contents
