Lopi ProBuilder 24 CleanFace GSR2 Installation Manual page 52

52
Log #8
Place log #8 as shown below. Log #8 has a notch that aligns the log with the finger of the log grate.
Log #9
Place log #9 as shown below. The hole on the bottom of log #9 fits over the pin on the left end of Log #1.
The right end of log #9 rests on Log #7. There is a notch in the end of the log that rests on the finger of
the log grate (see below).
© Travis Industries
Installation
(for qualified installers only)
12/17/20 - 1528 PB24 CF Install (AUST)