Avaya 8800 Installation Manual page 44

8010, 8006, and 8003-R chassis installation
- Phillips screwdriver
Procedure steps
1. Hold each rack-mounting bracket against one side of the chassis. Ensure the
44 Installation — Chassis
attachment holes in the bracket match the holes in the chassis.
Each bracket fits only one side of the chassis. The brackets are labeled R (right)
and L (left). If the mounting holes do not line up between a bracket and the chassis,
try that bracket on the other side of the chassis.
For more information about positioning the rack-mounting brackets, see
Positioning the rack-mounting brackets: 8010 chassis
Positioning the rack-mounting brackets: 8006 chassis
Positioning the rack-mounting brackets: 8003-R chassis
Figure 10: Positioning the rack-mounting brackets: 8010 chassis
Figure 11: Positioning the rack-mounting brackets: 8006 chassis
Comments? infodev@avaya.com
Figure 10:
on page 44, Figure 11:
on page 44, and Figure 12:
on page 45.
November 2012