Avaya 8800 Installation Manual page 78

Switch operations
3. Locate the read-write protect switch on the edge opposite the arrow on the memory
4. Adjust the read-write protect switch.
5. To reinsert the card, position the card with the label facing to the left and the insert
6. Insert the card into the card receptacle.
7. Gently push in the card until it fits tightly in place.
78 Installation — Chassis
Caution:
Risk of data loss
You must remove the card from the 8692 SF/CPU module before you change the
read-write protection. Failure to remove the card can result in improper write
protection.
card.
For information about the location of the read-write protect switch, see
Memory card read-write protect switch
Figure 45: Memory card read-write protect switch
arrow pointing toward the card receptacle.
Comments? infodev@avaya.com
on page 78.
Figure 45:
November 2012