Chapter 2
Installing the Cable Management Bracket
2-8
The Cajun P550R/P880/P882 switch is shipped with a cable
management bracket. The bracket is installed on the right side of the
chassis.
To install the Cable management bracket:
1. Remove the plastic piece from the right side of the chassis.
2. Line the bracket up with the ball studs and screw holes and
push until it locks into place (Figure 2-5).
Figure 2-5. Installing the Cable Management Bracket
3. Tighten the rack-mount pan head screws.
4. Thread the cables through the bracket to secure.
Cable Management
Cajun P550R/P880/P882 Switch Installation Guide
Bracket