Installing The Cable Guides For The 8306 And 8310 Chassis - Avaya Ethernet Routing Switch 8300 Series Quick Start Manual

Hardware installation
3. To insert the chassis in a standard equipment rack (19-inch), hold the chassis in
4. Insert and tighten the rack-mounting screws with a Phillips screwdriver.

Installing the cable guides for the 8306 and 8310 chassis

Install the cable guides to keep cable clusters fastened, out of the way, and accessible for
maintenance.
Procedure steps
1. Loosen, but do not remove, the rack-mounting screws needed to install one cable
2. Slide the guide onto the loosened screws.
28 Quick Start
position and align the flanged end of each mounting rail with the two holes on each
side of the vertical rack support.
guide.
The following figures show the 8306 and 8310 chassis.
May 2011