Avaya 8800 Installation Manual page 27

Figure 2: 8010 chassis and components
The 8010 chassis has three power supply bays. The Avaya Ethernet Routing Switch 8800/8600
can be configured for AC input or DC input applications or site installations. The 8010 chassis
supports the following AC power supplies:
• 8004AC
• 8005AC
• 8005DI AC
The 8010 chassis supports the following DC power supplies:
• 8004DC
• 8005DC
• 8005DI DC
Important:
R, RS, or 8800 modules installed in the 8006, 8010, 8010co, or 8003-R chassis may require
a minimum of one 8005AC, 8005DI AC, or 8005DC power supply. Use the power calculator
tool (accessible from http://www.avaya.com/support) to determine the power supply
requirements for your specific module and chassis configuration. If your module or chassis
configuration changes, then reuse the tool to determine if a power supply change is also
required. If an 8005 type power supply is required, then all power supplies must be 8005
type. You can mix different types of 8005 power supplies in the same chassis.
Installation — Chassis
8010 chassis
November 2012 27