Avaya 8800 Installation Manual page 29

Figure 3: 8006 chassis and components
The 8006 chassis has three power supply bays. The Ethernet Routing Switch 8800/8600 can
be configured for AC input or DC input applications or site installations. The 8006 chassis
supports the following AC power supplies:
• 8004AC
• 8005AC
• 8005DI AC
The 8006 chassis supports the following DC power supplies:
• 8004DC
• 8005DC
• 8005DI DC
Important:
R, RS, or 8800 modules installed in the 8006, 8010, 8010co, or 8003-R chassis may require
a minimum of one 8005AC, 8005DI AC, or 8005DC power supply. Use the power calculator
tool (accessible from http://www.avaya.com/support) to determine the power supply
requirements for your specific module and chassis configuration. If your module or chassis
configuration changes, then reuse the tool to determine if a power supply change is also
required. If an 8005 type power supply is required, then all power supplies must be 8005
type. You can mix different types of 8005 power supplies in the same chassis.
If your Ethernet Routing Switch 8800/8600 is operating in a redundant power configuration,
you can upgrade the Ethernet Routing Switch 8800/8600 for additional power while the
Ethernet Routing Switch 8800/8600 remains in operation.
Installation — Chassis
8006 chassis
November 2012 29