Avaya 8800 Installation Manual page 46

8010, 8006, and 8003-R chassis installation
3. Measure the appropriate number of rack units of free vertical space inside the rack
4. Hold the chassis in position and align the flanged end of each mounting rail with the
46 Installation — Chassis
Figure 14: Attaching the rack-mounting brackets to the 8006 chassis
Figure 15: Attaching the rack-mounting brackets to the 8003-R chassis
and mark the spot.
For more information about the number of rack units to allocate for each chassis,
see Procedure job aid
two holes on each side of the vertical rack support.
Complete this step with two people. Ensure that the hole pairs on either side of the
vertical support match horizontally. For more information about aligning the rack-
mounting brackets, see
equipment rack: 8010 chassis
brackets with the equipment rack: 8006 chassis
Comments? infodev@avaya.com
on page 49.
Figure 16: Aligning the rack-mounting brackets with the
on page 47, Figure 17: Aligning the rack-mounting
on page 47, and Figure 18:
November 2012