Reference Manual
00809-0100-4308
Procedure
1. Install the Black Power Module, SmartPower
2. Close the housing cover and tighten to site or safety specifications. Always ensure a
3.10
Position the antenna
The antenna should be positioned vertically, either straight up or straight down, and it
should be approximately 3 ft. (1 m) from any large structure, building, or conductive
surface to allow for clear communication to other devices.
Reference Manual
into the transmitter.
proper seal by tightening the electronics housing covers so that metal touches
metal, but do not overtighten.
A. Keep cover tight
™
Solutions model number 701PBKKF
Installation
February 2020
71